- Home
- Programs
- Engineering Services (DES)
- Authorized Materials Lists (AML)
- Prestress/Post-Tensioning Strand Systems
Prestress/Post-Tensioning Strand Systems
Stresstek
S4.5
Last edit date: 3/20/2024
GENERAL |
| Bar or Tendon Size |
Strand Diamter |
Ultimate (kips) |
Concrete Strength(psi) |
PJack (kips) |
| 4 |
1/2" |
165.2 |
N/A |
124 |
WEDGES |
| Wedges Length |
Material |
Wedge Parts |
Wedge Angle |
Wedge Inside Diameter |
|---|
| 1.85" |
AISI 86L20 Rc 59-62 | |
7° 10' |
|
| 1.85" |
AISI C11L17 Rc 59-62 | |
7° 10' |
|
ANCHOR HEADS |
| Anchor Heads Size |
Material |
Authorization Date |
|---|
| 4 Ø x 2" |
4140/42 Cold Finished | 4/2/1979 |
Wedge hole angle: 7° Wedge hole diameter: 0.970" Strand hole diameter: 0.570" |
BEARING PLATES |
| Bearing Plates Size |
Material |
Authorization Date |
|---|
| 6 3/4" Square x 7/8" |
ASTM A-36 | 4/2/1979 |
Bearing hole diameter: 2 3/4" Spiral size and turns: none |
TRUMPETS |
| Trumpets Size |
Material |
Authorization Date |
|---|
| 8" |
0.065" Wall Tubing | 4/2/1979 |
DUCTS |
| Ducts Size |
Material |
Authorization Date |
|---|
| There are no duct components for this system at this time |
