- Home
- Programs
- Engineering Services (DES)
- Authorized Materials Lists (AML)
- Prestress/Post-Tensioning Strand Systems
Prestress/Post-Tensioning Strand Systems
DYWIDAG-Systems International
8-0.6
Last edit date: 3/20/2024
GENERAL |
| Bar or Tendon Size |
Strand Diamter |
Ultimate (kips) |
Concrete Strength(psi) |
PJack (kips) |
| 8 |
0.6" |
468.8 |
N/A |
351.6 |
WEDGES |
| Wedges Length |
Material |
Wedge Parts |
Wedge Angle |
Wedge Inside Diameter |
|---|
| 1.875" |
AISI C12L14 CD | 2 |
7° 10' ± 5' |
|
ANCHOR HEADS |
| Anchor Heads Size |
Material |
Authorization Date |
|---|
| 7" Ø x 2 3/8" (w / 4 Hole) |
AISI C1045-C1050 | 12/19/1990 |
Wedge hole angle: 6.5° Wedge hole diameter: 1.16" Strand hole diameter: 0.71" |
BEARING PLATES |
| Bearing Plates Size |
Material |
Authorization Date |
|---|
| There are no bearing plate components for this system at this time |
Bearing hole diameter: Spiral size and turns: none |
TRUMPETS |
| Trumpets Size |
Material |
Authorization Date |
|---|
| There are no trumpet components for this system at this time |
DUCTS |
| Ducts Size |
Material |
Authorization Date |
|---|
| There are no duct components for this system at this time |
