- Home
- Programs
- Engineering Services (DES)
- Authorized Materials Lists (AML)
- Prestress/Post-Tensioning Strand Systems
Prestress/Post-Tensioning Strand Systems
DYWIDAG-Systems International
12-0.6 MA (System 100)
Last edit date: 3/20/2024
GENERAL |
Bar or Tendon Size |
Strand Diamter |
Ultimate (kips) |
Concrete Strength(psi) |
PJack (kips) |
12 |
0.6" |
703 |
4000 |
527 |
WEDGES |
Wedges Length |
Material |
Wedge Parts |
Wedge Angle |
Wedge Inside Diameter |
1.654" |
AISI C12L14 | 3 |
7° 30' ± 10' |
0.56" ± 0.003" |
1.654" |
AISI C11L17 | 3 |
7° 30' ± 10' |
0.56" ± 0.003" |
ANCHOR HEADS |
Anchor Heads Size |
Material |
Authorization Date |
6.30"Ø x 2.56" |
ASTM A521 (Forged) | 9/17/1991 |
6.25"Ø x 2.75" |
HR C1045 | 11/16/2007 |
Wedge hole angle: Wedge hole diameter: Strand hole diameter: |
BEARING PLATES |
Bearing Plates Size |
Material |
Authorization Date |
8.925"Ø x 7.104" |
ASTM A536 Gr. 65-45-12 | 8/1/2014 |
Bearing hole diameter: Spiral size and turns:
|
TRUMPETS |
Trumpets Size |
Material |
Authorization Date |
19.685" x 4.724" |
Hard Polyethylene | 3/27/1991 |
16.929" x 4.724" |
Hard Polyethylene | 11/16/2007 |
DUCTS |
Ducts Size |
Material |
Authorization Date |
3.5" O.D. |
ASTM A653 Gr.60 | 11/16/2007 |
SPIRAL |
A615 Grade 60 #5 @ 2.00" Pitch; 12.5" OD; 7 turns |