1. Home
  2. Programs
  3. Engineering Services (DES)
  4. Authorized Materials Lists (AML)
  5. Prestress/Post-Tensioning Strand Systems

Prestress/Post-Tensioning Strand Systems

Avar Construction Systems, Incorporated

ACS 22.5

Last edit date: 3/20/2024

GENERAL
Bar or Tendon Size Strand Diamter Ultimate (kips) Concrete Strength(psi) PJack (kips)
22 1/2" 908.6 3500 682

WEDGES
Wedges Length Material Wedge Parts Wedge Angle Wedge Inside DiameterBABA Act Information*
1.46" AISI 11L17 Rc 59-63 7° 5' Unconfirmed

ANCHOR HEADS
Anchor Heads Size Material Authorization DateBABA Act Information*
7" Square x 3 1/2" C1040 /45 H.R.Plate1/14/1991Unconfirmed
Wedge hole angle: 7°
Wedge hole diameter: 1.035"
Strand hole diameter: 0.63"

BEARING PLATES
Bearing Plates Size Material Authorization DateBABA Act Information*
14 1/2" Square x 2" ASTM A-364/19/1985Unconfirmed
12" Square x 12" ASTM A 536 Gr 80-55-061/14/1991Unconfirmed
Bearing hole diameter: 6"
Spiral size and turns: #4-7 turns

TRUMPETS
Trumpets Size Material Authorization DateBABA Act Information*
18" 24 Gage Galvanized4/19/1985Unconfirmed
18" Polyethylene 0.06"4/19/1985Unconfirmed

DUCTS
Ducts Size Material Authorization DateBABA Act Information*
3 1/2" I.D. 26 Gage4/19/1985Unconfirmed

SPIRAL
FOR CAST BEARING PLATE: #4 SPIRAL, 13" OD., 7 TURNS AT 2.5" PITCH, TIE FIRST TWO TURNS

Caltrans contact: Jim Ma, Concrete Committee Chair, jim.ma@dot.ca.gov

*As attested to by the supplier as of April 14, 2026 per definition in 2 CFR 184 and 23 CFR 635.410. Stakeholders should use this information in conjunction with corresponding Caltrans special provision section 6-1.04 to understand applicable requirement for the project.

The California Department of Transportation (Caltrans) is implementing statutory changes required by the Bipartisan Infrastructure Law -Build America, Buy America Act (BABA), as outlined in 2 CFR 184 and 23 CFR 635.410.

https://www.fhwa.dot.gov/construction/cqit/buyam.cfm