1. Home
  2. Programs
  3. Engineering Services (DES)
  4. Authorized Materials Lists (AML)
  5. Composite Column Jacket Systems

Composite Column Jacket Systems

Last edit date: 5/21/2021
FRP Type FRP Supplier FRP System Identification
E-Glass1 Fiber Reinforced Polymer(FRP)Fyfe Company LLC
3940 Ruffin Road, Suite C
San Diego, CA 92123
(858) 642-0694		TYFO SEH-51A
TYFO SEH-51
Hexcel Corporation
1930 North King Street
Seguin, TX 78155
(830) 401-8139		HEX 3R Wrap 107/HEX 3R Epoxy 300
Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
(800) 933-7452		SikaWrap 107G/Sikadur Hex 300
SikaWrap 100G/Sikadur Hex 300
Simpson Strong Tie - Stockton
5151 South Airport Way
Stockton, CA 95206
CSS-CUGF27/CSS-ES
Carbon Fiber Reinforced Polymer(FRP)BASF Construction Chemicals
889 Valley Park Drive
Shakopee, MN 55379
(800) 243-6739		MasterBrace FIB 300/50 CSF
FRP Solutions
982 West 10th Street
Azusa, CA 91702
(626) 815-3978		C-Clad FRP Composite System FC061/RN075 LPL
Fyfe Company LLC
3940 Ruffin Road, Suite C
San Diego, CA 92123
(858) 642-0694		Tyfo SCH-41-2X
Tyfo SCH-41
MAPEI Corporation
1144 East Newport Center Drive
Deerfield Beach, FL 33442
(630) 338-6173		MapeWrap C Uni-Ax 300/ MapeWrap 31
MapeWrap C Uni-Ax 600/ MapeWrap 31
Milliken Infrastructure Solutions
920 Milliken Road
Spartanburg, SC 29303
(800) 655-6750		RenewWrap ESR CF600/RenewWrap ESR Saturant
RenewWrap ESR CF335/RenewWrap ESR Saturant
Mitsubishi Plastics Composites America, Incorporated
401 Volvo Parkway
Chesapeake, VA 23320
(757) 382-5844		REPLARK 30/L700S-LS
Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
(800) 933-7452		SikaWrap 103C/Sikadur Hex 300
SikaWrap 103C 2X/Sikadur Hex 300
Simpson Strong Tie - Stockton
5151 South Airport Way
Stockton, CA 95206
CSS-CUCF44/CSS-ES
CSS-CUCF11/CSS-ES
CSS-CUCF22/CSS-ES
Structural Technologies
10150 Old Columbia Road
Columbia, MD
(443) 561-3650		V-Wrap C400HM/ V-Wrap 770

NOTES:

1 E-Glass is type E-CR Glass and meets ASTM D578 E-CR Glass

The above fiber reinforced polymecomposites column casing systems have undergone laboratory testing and are approved for use in limited situations. Advanced composite column casing thicknesses, as shown on the Standard Drawing, are designed to enhance both the shear capacity and increase the lateral confinement of the plastic hinge zone for bridge columns with poor transverse reinforcement details. Material testing standards and provisional specifications have been developed to allow limited field installations for both E-glass (GFRP) and carbon (CFRP) fiber composites, under strict conditions.

Advanced composites systems shall be specified as an alternative if conditions below are satisfied:

  1. Displacement ductility demand not more than 6 for circular columns and not more than 3 for rectangular columns. It may be permissible to use advanced composites on circular columns with ductility demands approaching 8, with the written approval of the Earthquake Engineering Branch and the Design Supervisor
  2. For rectangular columns, the longest dimension is limited to a maximum of 36 inches. Rectangular column side aspect ratio shall not be greater than 1.5. For shear deficient only columns, these limits may be exceeded; however, exceeded limits must be approved by the Earthquake Engineering Branch specialist
  3. For circular columns, the diameter must be 72 inches or less
  4. Lap splices do not exist in expected plastic hinge zones
  5. Composites shall not be used for single column bent structures.
  6. The total axial load (dead load + overturning) is not greater than 0.15 f’cAg
  7. The columns longitudinal reinforcement ratio is not greater than 2.5%
  8. The bridge does not require flame-sprayed plastic

Caltrans contact: Jim Gutierrez, (916) 227-8519, jim.gutierrez@dot.ca.gov